SC Sanevit 2003 SA

Company Description

The medical sterile syringes and needles for single use with mark CS 041 made by SC SANEVIT 2003 SA, satisfy to the needs of the medical network from Romania and the international standards in field. High performance equipment with impressive performance accomplish an output at a level of 7,000 pcs/hour for the syringes assembling and packing and near 18,000 pcs for the needles assembling. The yearly designated capacity of the plant is 160 mil pcs syringes and 520 mil pcs needles. The product quality control is realized with modern devices, comply with the International Standards in the field. In order to verify products sterility, we have a Health Care Ministry certified laboratory. Syringes, needles and cannulae quality control is assured by tipe and lot cheking and the products are endorsed by manufacturing and cheking guarantee during 5 years since the sterilization date, the worldwide of warranty.Syringes manufactured by SC SANEVIT 2003 SA have 3 components ( cylinder, plugger and rubber piston ), possessing a numberAdvantages over other brands:- much increase snugness of the rubber piston that seal between plunger and cylinder through rings surfaces;- tightness is maintained for an extended period, assured by the compensation of any slight dimensional in plastic components by the optimal reliability of our rubber piston;- limited pressure in necessarily to push the plunger and to achieve uniform dosing of the injectable liquid because of light and gentle slide by the piston inside the whole cylinder lenght, resulting from reduced friction between the cylinder and rubber piston;- safety in using the piston is achieved by superior rigidity of cylider-piston assembly, producing maximized contact zone;- easy observation of the reference line inside the cylinder is facilited by the contrasting definition between rubber piston and cylinder;- danger of plastic particle injection is eliminated as a result of the construction of the rubber piston;- the possibility of detaching fragments is completely precluded because of the friction between piston and cylinder, during assembly as well as in use.The conditions of needle and single-use syringes manufacture comply with all existing Romanian and International Standards and legislations.